Professional transparent adhesive 35ml

Professional PU adhesive is designed for fast and reliable bonding on most materials.

Recommended for:

• Leather, rubber, textile material, foam rubber, synthetic materials

• Wood, boards resistant to high temperatures, veneer, linoleum, tiles, laminated surfaces, plastic materials

• Decoration fasteners

• Metal, tin, foil

• Ceramic products

• Ideal for repairing soles and sneakers, PU and PVC products.

Water resistant adhesive, used for interior and exterior use.

APPLICATION: The surfaces to be glued must be dry and clean.

Cold gluing method: Apply a thin layer of adhesive on both surfaces, wait 3 - 5 minutes. Bonding will take place after the adhesiveness of the glue disappears (check with a touch of the finger). Press with maximum effort for a few seconds. If possible, leave the surfaces fixed for 30 - 40 minutes. The glued product can be used after 8 hours.

Hot glue method:

Apply a thin layer of adhesive on both surfaces, wait 10 - 15 minutes. Heat the soldering surfaces to a temperature of 60°C. Press firmly for a few seconds. Can the glued product be used after? 2 hours.

Fresh adhesive can be removed with alcohol, acetone. Do not use for bonding polyethylene, polypropylene and Teflon. Detailed instructions are available on the website.

Contains: methyl acetate, acetone, cyclohexane

CAUTION!

Keep out of reach of children.

Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Smoking prohibited.

Avoid inhalation of vapors/spray.

Call a toxicology center or a doctor if you feel unwell.

Dispose of the contents/container according to national legislation.

Store and transport at temperatures from -5°C to +30°C. Solder at a temperature above +10 0C The operating temperature of the soldered product is from -400C to +800C.

The guaranteed storage period is 18 months.

Volume 35 ml.

Weight: 0.042 kg